1. Home
  2. Resources
  3. How To Guides
  4. How to Videos and Guides
  5. How to seed atrial cardiomyocytes on Multi-Electrode Array (MEA)

How to seed atrial cardiomyocytes on Multi-Electrode Array (MEA)

In this video, you will learn how to prepare the MEA plate before seeding iPSC-derived Cardiomyocytes. We will walk you through setting up the cloning rings, coating with fibronectin and finally seeding cardiomyocytes on to the MEA plate.

How to seed your cardiomyocytes on MEA

In this video, you will learn how to prepare the MEA plate before seeding iPSC-derived Cardiomyocytes. We will walk you through setting up the cloning rings, coating with fibronectin and finally seeding cardiomyocytes on to the MEA plate.

Before beginning download our handy guide on how to prepare Axol’s Cardiomyocyte Maintenance and Plating Medium, along with step by step details on how to thaw and culture the iPSC-derived Cardiomyocytes.

How to prepare the MEA plate

Step 1: Prepare required materials

Step 2: Place the CellSpotter-comfort into an MEA 24-well plate-comfort pre-coated with Fibronectin 40 μg/mL

Step 3: In a sterile dish stand the cloning rings upright

Step 4: Test for stability of cloning ring by tapping the sterile dish. If the cloning ring falls over turn it round the other way.

Step 5: Add 100 μL of Plating Medium to each cloning ring to wet them

Step 6: Gently tap the cloning rings to remove the medium

Step 7: Remove the fibronectin from the MEA plate

Step 8: Add the wetted cloning rings to the CellSpotter installed on the MEA plate

Step 9: Add cells into the cloning ring

Step 10: Add Plating Medium into the well surrounding the cloning ring, repeat for each well

Step 11: Incubate the MEA plate overnight at 37oC, 5% CO2

Step 12: Remove the cloning rings

Step 13: Remove the CellSpotter

Easy right? Now your cardiomyocytes are ready.